MAN B&W 7L70MC MK6 ENGINE & ITS COMPONENTS : Y.A. Marine

We at Y.A. Marine can deliver all kinds of main engine as well as auxillary engine following components :

COMPLETE AUXILIARY ENGINES

 

CRANKSHAFTS

 

ENGINE FRAME AND BEDPLATES

 

CYLINDER COVERS

 

PISTON RODS

 

CONNECTING RODS

 

PISTONS

 

LINERS

 

FUEL PUMPS

 

CAMSHAFTS

 

VALVE SPINDLES & SEATS

 

VARIOUS OTHER PARTS (On specific requirement)

7l70.jpg

Y.A. Marine
Suppliers of all kind of ship machinery & spares
Email : yatechmarine@gmail.com / yamarine786@gmail.com
Web : marinemachinery.webs.com
Blogs : reconditionmachinery.blogspot.com/machinio.blogspot.in

Stockiest/ Suppliers: Main & Aux. Engine spares | Navigation | Air & Refrigeration Compressors | Turbocharger | Purifiers | Hydraulic Equipment | Ship Repair | Power Plant

 

15PPM BILGE ALARM : Y.A. MARINE

We at Y.A. Marine can deliver 15PPM bilge alarm system at most competitve prices :

A 15ppm Bilge Alarm is normally used in connection to a ship’s oil filtering equipment, monitoring the oil content of the separated/filtered water and stopping the discharge into the sea if the oil content exceeds 15ppm (parts per million).

Furthermore the 15ppm bilge alarm can in principle be used as a simple oil content alarm for other applications where the water does not contain solids or other substances disturbing the operation.

When a complete new bilge water separator is delivered to an existing ship or to a new building, the separator already contains a 15 ppm bilge alarm. However, when the 15ppm bilge alarm on an existing ship is broken beyond repair, or repairing the bilge alarm would be almost as expensive as a new one, the best solution is to replace the old alarm with a new one.

15ppm.jpg

Y.A. Marine
Suppliers of all kind of ship machinery & spares
Email : yatechmarine@gmail.com / yamarine786@gmail.com
Web : marinemachinery.webs.com
Blogs : reconditionmachinery.blogspot.com/machinio.blogspot.in

Stockiest/ Suppliers: Main & Aux. Engine spares | Navigation | Air & Refrigeration Compressors | Turbocharger | Purifiers | Hydraulic Equipment | Ship Repair | Power Plant

 

WOODWARD ENGINE GOVERNORS :

WE at Y.A. Marine Specialize in supply of Used as well as new governors for Marine Engines & steam turbine :

The governors that we deal in includes various type of governors that will be provided by us for different application serving in different industries :

Woodward UG Universal Governors :

Mechanical-hydraulic governors for dependable control of engines or steam turbines

Woodward’s UG “universal” governors are mechanical-hydraulic governors for controlling diesel, gas, or dual fuel engines, or steam turbines. This proven design has been an industry standard for many years and worldwide acceptance provides easy service in most engine and governor shops.

UG governors have their own self-contained oil supply and are driven by a suitable UG drive from an engine or turbine. They operate either isochronously or in droop, and have a wide variety of optional features for use in generator, pump, marine propulsion, and other applications. UG governors have a maximum drive speed of 1500 to 1600 rpm.

UG-8, UG-8PL GOVERNORS :

UG-Dial governors are particularly suited for constant speed applications. Knob speed settings make synchronization easy for generator applications. Motor speed setting is available for remote synchronization. Adjustable droop makes load sharing between engines precise.

UG Lever governors are widely used for variable speed control. Remote speed setting can be either mechanical through the speed setting lever or pneumatic with a special speed setting device. Special attachments are available for other applications.

The UG pump is designed for applications which reverse engine rotation.

UG 8

Features :

Isochronous or droop control
Dashpot/needle valve compensation
Lever, dial, motor, or pneumatic speed settings
Damped ballhead
Self contained oil sump

UG 10, UG 10D GOVERNORS:

Applications:
The UG-10 MAS (UG with milliamp speed setting)
controls the speed or power of prime movers used
for propulsion, locomotives, pumps, and
compressors.
The UG MAS speed-setting governor is a generic
module. It can be used on most engines with a UG
drive.
The UG MAS consists of a standard UG Dial
governor equipped with a special cover assembly
and a separate electronic driver box.

UG 10D

Woodward UG-25+ Electronic-Hydraulic Governor :

The UG-25+ governor is a microprocessor-controlled, mechanical-hydraulic amplified governor for controlling diesel, gas and dual fuel engines, and steam turbines. The UG-25+ offers enhanced control capabilities, such as start fuel and boost limiting schemes. The additional transient fuel limiting (jump-rate) improves the engine load acceptance and reduces transient emissions significantly.

UG-25+ Features:

State-of-the-art speed sensing and control algorithms
Enhanced PID dynamics
Configurable speed settings and adjustment rates
Multiple fuel limiting algorithms, such as jump-rate, boost pressure, and start fuel limiting.

Comprehensive diagnostics for easy troubleshooting
End-of-line programmability simplifies inventory

UG 25+

UG 40 GOVERNORS :

UG-40 governors are used for speed or load control of dual-fuel, diesel, or gas engines or steam turbines with governor drive speeds of 350 to 1050 rpm or 550 to 1300 rpm. They are typically used to drive alternators, DC generators, pumps, compressors, or marine propellers.

Governors with lever speed setting are primarily used for propulsion engines. Dial or motor speed setting is primarily used for power-generation installations.

Droop is available in UG-40 governors to allow load sharing between multiple engines or power generation against an infinite bus.

All UG-40 governors have adjustable compensation to allow isochronous speed control. A pointer on the governor sets and indicates the amount of compensation. Compensation is temporary—a needle valve sets the speed at which compensation is removed from the governor speed setting. Special damped ballheads and spring-driven drives are available for engines with rough governor drives.

The governors provide 38° of output shaft travel for a maximum work output of 50 ft-lb (67J). Recommended rotation is 2/3 of the maximum, or 25° for a work output of 33 ft-lb (45J). This allows sufficient overtravel at each end so the governor can create a shutdown and also give maximum fuel when required. The terminal shaft is mechanically linked to the fuel system.

A standard feature of the UG-40 Dial governor is a load-limit control that limits the amount of fuel supplied by restricting the travel of the governor output shaft. An indicator dial shows the setting of governor-output-shaft limit position. The load-limit control may also be used for shutting down the engine, turbine, or other type of prime mover by turning it to zero. Load limit is available on the lever governor as a factory option.

UG 40

3161 Governors :

The 3161 governor is a mechanical-hydraulic device that senses speed to control dual fuel engines, diesel engines, or steam turbines. The variety of standard features and available options make the governor ideal for a wide variety of applications that require work capacity of up to
24 N-m (18 lb-ft). Applications include off-highway vehicles, industrial, marine, generator set, compressor, or pump drives.

3161 operation can be isochronous for accurate constant speed or frequency control, or droop for load sharing. The amount of droop may be changed internally or with an optional external lever.

Among the governor options are torque rise and low idle offset which provide increased low speed, no load stability, and reduced undershoot and stalling.

The governor has its own sump for quick startup response. Direction of rotation of the governor drive is set at the factory, but can be changed in the field by turning the pump housing.

Features:

Isochronous or droop control
Manual, electric, pneumatic speed setting options
Manual, electric, hydraulic shutdown options
Fuel limiting options
Torque rise, low idle offset options
Terminal position indicator
Operates with engine oil or self-contained sump
Directly interchangeable with UG-8 governor

3161 2

Contact us at Y.A. Marine :

Y.A. Marine

Suppliers of all kind of ship machinery & spares
Email : yatechmarine@gmail.com / yamarine786@gmail.com
Web : marinemachinery.webs.com
Blogs : reconditionmachinery.blogspot.com/machinio.blogspot.in

Stockiest/ Suppliers: Main & Aux. Engine spares | Navigation | Air & Refrigeration Compressors | Turbocharger | Purifiers | Hydraulic Equipment | Ship Repair | Power Plant

WOODWARD UG 8, UG 10D & UG 25+ GOVERNORS : Y.A. Marine

We at Y.A. Marine can inshaallah deliver all kinds of Recondition ship machinery and its Spares in bulk quantity.

The UG product s are mechanical-hydraulic governors for controlling diesel, gas, or dual fuel engines, or steam turbines. The governor provides extremely reliable speed control throughout the drive speed and temperature range. This proven design has been the industry standard for many years and its worldwide acceptance provides easy service in most engine and governor shops.

UG-Dial governors are particularly suited for constant speed applications. Knob speed settings make synchronization easy for generator applications. Motor speed setting is available for remote synchronization. Adjustable droop makes load sharing between engines precise.

UG Lever governors are widely used for variable speed control. Remote speed setting can be either mechanical through the speed setting lever or pneumatic with a special speed setting device. Special attachments are available for other applications.

The UG pump is designed for applications which reverse engine rotation.

Features :

Isochronous or droop control

Dashpot/needle valve compensation

Lever, dial, motor, or pneumatic speed settings

Damped ballhead

Self contained oil sump

Y.A. Marine

Suppliers of all kind of ship machinery & spares

Email : yatechmarine@gmail.com

Web : marinemachinery.webs.com

Blogs : reconditionmachinery.blogspot.com/machinio.blogspot.in

Stockiest/ Suppliers: Main & Aux. Engine spares | Navigation | Air & Refrigeration Compressors | Turbocharger | Purifiers | Hydraulic Equipment | Ship Repair | Power Plant